





































- Facilitates deployment of PoE devices where power outlets are not available- Reduces installation and network equipment costs by eliminating the need for electrical wiring- Provides power over existing network cabling to PoE devices such as access points. IP cameras. and IP phones- Lightweight. compact and easy to install- Supports 802.3af / 802.3at- 10/100/1000 interface provides flexibility for all types of connectionsD-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE). even when other devices in the network do not support it. With PoE technology. low voltage DC power and Ethernet data signals are combined on a single network cable. which facilitates powering of end devices like IP Cameras. wireless Access Points (APs). and VoIP Phones. This reduces cable clutter. eliminates the need for dedicated electrical outlets on the wall. ceiling. or other unreachable places. reduces installation time. and lowers costs.The DPE-301GI device supports Gigabit speeds. and can connect to 10Mbps. 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards. which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact. the DPE-301GI is lightweight. has integrated mounting slots. and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building. such as on ceilings or near entryways. and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal. allowing a single Ethernet cable to carry both data and power to a device.Also known as a “midspan PSE”. the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN. which is the network connection.typically connected to a non-PoE switch or router. The other port isfor PoE OUT. which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link. although it’s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W. such as high power 802.11ac APs and IP cameras with PTZ motors. heaters and blowers.PoE Injector and PoE Splitter TandemBoth the DPE-301GI (injector) and DPE-301GS (splitter) can be used together. as a complete PoE transport system. This is especially useful when a PoE switch is not available. and the end device is not PoE capable. but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch. install the splitter close to the end device. and plug in the cables.
Price now:
From
To
Price History:
Details:- Facilitates deployment of PoE devices where power outlets are not available- Reduces installation and network equipment costs by eliminating the need for electrical wiring- Provides power over existing network cabling to PoE devices such as access points. IP cameras. and IP phones- Lightweight. compact and easy to install- Supports 802.3af / 802.3at- 10/100/1000 interface provides flexibility for all types of connectionsD-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE). even when other devices in the network do not support it. With PoE technology. low voltage DC power and Ethernet data signals are combined on a single network cable. which facilitates powering of end devices like IP Cameras. wireless Access Points (APs). and VoIP Phones. This reduces cable clutter. eliminates the need for dedicated electrical outlets on the wall. ceiling. or other unreachable places. reduces installation time. and lowers costs.The DPE-301GI device supports Gigabit speeds. and can connect to 10Mbps. 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards. which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact. the DPE-301GI is lightweight. has integrated mounting slots. and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building. such as on ceilings or near entryways. and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal. allowing a single Ethernet cable to carry both data and power to a device.Also known as a “midspan PSE”. the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN. which is the network connection.typically connected to a non-PoE switch or router. The other port isfor PoE OUT. which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link. although it’s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W. such as high power 802.11ac APs and IP cameras with PTZ motors. heaters and blowers.PoE Injector and PoE Splitter TandemBoth the DPE-301GI (injector) and DPE-301GS (splitter) can be used together. as a complete PoE transport system. This is especially useful when a PoE switch is not available. and the end device is not PoE capable. but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch. install the splitter close to the end device. and plug in the cables.
Price now:
From
To
This site contains affiliate links for which we may be compensated.
Laptop Outlet
33.36% ( -£5.00)
New
£9.99
£14.99
Laptop Outlet
15.40% ( -£2.00)
Refurbished
£10.99
£12.99
Refresh Cartridges
0.46% ( -£0.10)
New
£21.87
eBay
New
£26.15
eBay
New
£26.25
OnBuy.com
0.17% ( -£0.05)
New
£29.48
- Facilitates deployment of PoE devices where power outlets are not available- Reduces installation and network equipment costs by eliminating the need for electrical wiring- Provides power over existing network cabling to PoE devices such as access points. IP cameras. and IP phones- Lightweight. compact and easy to install- Supports 802.3af / 802.3at- 10/100/1000 interface provides flexibility for all types of connectionsD-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE). even when other devices in the network do not support it. With PoE technology. low voltage DC power and Ethernet data signals are combined on a single network cable. which facilitates powering of end devices like IP Cameras. wireless Access Points (APs). and VoIP Phones. This reduces cable clutter. eliminates the need for dedicated electrical outlets on the wall. ceiling. or other unreachable places. reduces installation time. and lowers costs.The DPE-301GI device supports Gigabit speeds. and can connect to 10Mbps. 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards. which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact. the DPE-301GI is lightweight. has integrated mounting slots. and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building. such as on ceilings or near entryways. and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal. allowing a single Ethernet cable to carry both data and power to a device.Also known as a “midspan PSE”. the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN. which is the network connection.typically connected to a non-PoE switch or router. The other port isfor PoE OUT. which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link. although it’s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W. such as high power 802.11ac APs and IP cameras with PTZ motors. heaters and blowers.PoE Injector and PoE Splitter TandemBoth the DPE-301GI (injector) and DPE-301GS (splitter) can be used together. as a complete PoE transport system. This is especially useful when a PoE switch is not available. and the end device is not PoE capable. but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch. install the splitter close to the end device. and plug in the cables.
General | |
|---|---|
Color | white |
Size | 30 |
Brand | D-Link |
colour | white |
connector a | rj-45 |
type | poe injector |
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.